Project Profile
Determining MODU Design Loads Using Fuel Air Explosion Modeling Scenarios
Learn how we applied computational fluid dynamic (CFD) modeling scenarios to help operators understand the threat of explosion and thermal hazards and improve the structural design of offshore assets.
Project Objectives
#1
Create a 3D CAD model of the midsection of a generic MODU and identify critical areas with high risk of VCE scenario
#2
Apply CFD modeling to analyze dispersion and explosion scenarios in critical areas such as moonpool, drill floor, main deck and upper deck
#3
Capture worst case consequences following ignition of flammable volumes in the identified locations and record pressure time history for each explosion model
#4
Determine maximum levels of flammable material in each volume area to define a controlling load case to be applied at the initiation of a MODU design
Project Overview
Although rare, offshore explosions can have catastrophic and disruptive consequences that not only affect personnel and the environment but also can significantly impact industry operating standards and regulations. The threat of an accidental release of flammable materials stored on offshore drilling and production assets creates a high risk of potentially causing serious explosion and thermal hazards such as vapor cloud explosions (VCEs); so offshore asset owners must carefully consider and mitigate this risk before an asset has been designed and once it is active in the field. To support the safety of offshore personnel as well as to protect
Recognizing a need to develop
Study Needs
- Develop design basis blast loads for offshore assets
- Apply advanced software technology to analyze potential
fuel air explosion scenarios in critical areas of the asset - Perform detailed analysis to develop
screening level loads using CFD modeling - Record pressure time history results for each blast scenario